Home > News+ > Content

Hardware Processing

- Mar 27, 2018 -

Hardware processing

1. Before entering the work position, all employees should check whether their clothing conforms to the work requirements. Do not wear flip-flops, high-heeled shoes and clothing that affect safety. Wear long-haired helmets. To maintain proper posture while working, to have sufficient spirit to cope with the work, if you find that you are unwell, immediately leave the job and report to the leader. Must be concentrated in the operation of the operation, is strictly prohibited chat, mutual cooperation, the operator must not be in a state of irritability, fatigue, so as to avoid accidents and ensure operational safety.

2. Before the machine works, check whether the moving part is filled with lubricating oil, and then start and check whether the clutch and brake are normal, and run the machine for 1-3 minutes. When the machine is in trouble, it is forbidden to operate.

Third, when the mold is replaced, the power supply must be turned off first. After the punching department stops running, the mold can be installed and adjusted. After the installation and adjustment are completed, hand-push the flywheel to try twice and check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm and whether the blank holder is in a reasonable position.


Fourth, must wait for other personnel to leave the mechanical work area, and take away the debris on the workbench before starting the power to start the machinery.

5. After the machine is started, one person transports the materials and operates the machine. The other person must not press the power to build or step on the foot switch board, nor can they put the hand into the mechanical work area or manually touch the moving part of the machine. When working on machinery, it is forbidden to put his hand into the working area of the slider and it is forbidden to take and put the workpiece by hand. In order to take and place the workpiece in the die, a tool that meets the standards must be used. If you find that the machine has abnormal sound or the machine is malfunctioning, turn off the power switch immediately and check it.

6. During work hours, idle power should be turned off, and finished products, side materials, and sundries on the job should be well-organized to ensure that the working environment is clean and safe.

Related News

Related Products

  • High Precision Machining Parts
  • CNC Turning Processing Mechanical Parts
  • 6 Inch Chrome Peg Hook for Slatwall
  • Zinc Plated Extension Spring
  • Conical Valve Spring
  • CNC Turning Parts