Home > Knowledge > Content

Safety precautions for metal stampings

- Mar 26, 2018 -

Safety precautions for metal stampings

In the operation of metal stamping, safety technology measures must be done well, so when designing stamping hardware, the following requirements must be met:

1, The hardware structure should be able to ensure the convenience of operation, safety and reliability. The operator can successfully complete the stamping work without extending the hand, arm and head into the danger zone. (The operator should protect himself and do all safety measures)

2, pay attention to the debugging, installation, repair, handling and storage of security. No accident caused by hardware structure problems. (Details decide everything)

3, metal parts must have sufficient strength, the material must choose a reasonable, hardware should avoid the external convex and concave has nothing to do with the function, the outside should be chamfered, guide column guide sleeve should be away from the operator, the hardware pressure center should pass or close to the mold The centerline of the shank, guiding, positioning and other important parts should be clearly seen in the operation, so that accidents can be avoided.

4, When designing the hardware, the position of the mechanized device should be considered so that if necessary, mechanized and automated devices can be used instead of manual operations. (Can reduce operator's mistakes, accident safety occurred)

5, the top piece, pusher and stripper plate and other structures must be reliable. (Hardware wants to cross the border)

6. If there are dangerous factors, you should stop the operation and check the problem. Do not make the operator feel unsafe.

Metal stamping is the use of punch and die to iron, aluminum, copper and other anisotropic materials to deformation or fracture compression, to achieve a certain shape and size of a process.

Metal stamping is sometimes referred to as sheet forming, but it is slightly different. The so-called sheet molding refers to the use of plates, thin-walled tubes, thin sections, and the like as raw materials. Plastic forming methods are collectively referred to as sheet forming. At this time, the deformation of the thick plate is generally not considered.

Related Industry Knowledge

Related Products

  • Round Garment Rack
  • Hanging Rack Wire Display
  • Metal Fabrication Stamping Part
  • Slatwall Display Hook For Shopfittings
  • Carbon Steel Tower Spring
  • CNC Machined Parts