We know that because of its excellent performance, rubber parts are widely used, so today we will analyze the performance of rubber accessories!
1. Rubber accessories are made from rubber raw materials mixed with rubber after raw materials are mixed with rubber. The rubber compound is designed according to the characteristics of the required rubber parts and the required product hardness is set. The product production molding is molded by a rubber plate vulcanizer. After the product is molded, it is processed with flash and the surface of the product is smooth and free of burrs.
2. Rubber is a hot-melt thermosetting elastomer, while plastic is a hot-melt cold-curable. Due to the different types of rubber in the main body of sulfides, the temperature range of the molding and curing of rubber is quite different. It can even be affected by climate change and indoor temperature and humidity. Therefore, the production conditions of rubber parts need to be properly adjusted at any time. If not, there may be differences in the quality of rubber parts.
3. When the rubber parts are molded, the cohesive force of the elastic body can not be eliminated after a large pressure is pressed. When the molding is released from the mold, it often results in extremely unstable shrinkage, and it is necessary to wait for a period of time to stabilize the rubber parts. Therefore, at the beginning of a rubber accessory design, regardless of the formula or the mold, it is necessary to carefully calculate the cooperation. If not, it is easy to have unstable dimensions of the rubber accessory, resulting in low quality of the rubber accessory.
The above is an introduction to the characteristics of rubber accessories, if you need, professional manufacturers, to give you professional products and services! The use of imported raw materials and non-toxic, non-polluting additives. Strong technical force and strict process, so that products reach the various needs of customers, welcome new and old customers to plans to build sample.